Developing fatigue test machine for composite material

Authors

DOI:

https://doi.org/10.14232/analecta.2022.1.83-89

Abstract

This paper’s goal is to introduce the third step of the EFOP-3.6.1-16-2016-00014. project on the Faculty of Engineering, University of Szeged. In this period the production technology of composite material was chosen and a fatigue test machine was developed and tested. The paper shortly describes the composite materials and summarizes the theory of fatigue than it presents the process of the development with several prototypes of fatigue test machine, some of which were manufactured and tested. Initially a shaker played the key role in the first two conceptions and finally a crank mechanism became as the best solution. The main solved problems during the development were selection of bearings and solving the partly dynamic balancing of the moving parts.

Downloads

Download data is not yet available.

References

Czvikovszky –Nagy –Gaál: A polimertechnika alapjai, Műegyetemi Kiadó, 2000

Lukács –Csomós –Gácsi -Karcagi –Magyar –Tomolya: Fáradásos repedésterjedés különböző típusú kompozitokban, Anyagvizsgálók Lapja, 2004/4

Koncz –Magyarosi –Pusztai: Kompozitok és szendvicsszerkezetek -Repülőgép kompozit szerkezetjavító szakmai oktatási jegyzet, 2000

Taljera, Ramesh: Fatigue of Composite Materials, In book: Modenr Trends in Composite Laminates Mechanics, Researchgate.net, January 2003. DOI: https://doi.org/10.1007/978-3-7091-2544-1_6

Zsáry, Árpád: Gépelemek I, Tankönyvkiadó, Budapest, 1989. ISBN 963 18 1453 X

M. Csizmadia, Béla: Statika, Nemzeti Tankönyvkiadó Zrt., Gödöllő-Budapest, 1996. ISBN 978-963-19-2850-1, ISSN 1416-535X

Duffy, J.: Analysis ofmechanisms and robot manipulators. Arnold, London, 1980.

Haug, E. J.: Elements and methods computational dynamics, in E. J. HAUG, ed., Computer Aided Analysis and Optimization of Mechanical System Dynamics, Berlin, Springer, 1984. p. 3-21.

Kármán,T. ; Biot, M. A.: Matematikai módszerek műszaki feladatok megoldására. Műszaki Könyvkiadó, Budapest, 1963.

Péter Szuchy, Tamás Molnár, István Bíró, Sándor Csikós, László Gogolák, József Sárosi: Bending fatigue tests of carbon fiber reinforced epoxy resin composite plates, Acta Polytechnica HungaricaVol. 18, No. 2, 2021

Downloads

Published

2022-08-05

How to Cite

Szuchy, P., Molnár, T., Bíró, I., Csikós, S., Gogolák, L., & Sárosi, J. (2022). Developing fatigue test machine for composite material. Analecta Technica Szegedinensia, 16(1), 83–89. https://doi.org/10.14232/analecta.2022.1.83-89

Issue

Section

Articles

Funding data

Most read articles by the same author(s)

1 2 > >>