Communication Solutions in the Gas and Oily Industry

Ildi Bölkény; Marianna Vadászi; Hassan Sallo Dilshad

doi:10.14232/analecta.2025.1.71-75

Authors

Ildi Bölkény University of Miskolc https://orcid.org/0000-0003-4201-7866
Marianna Vadászi University of Miskolc
Hassan Sallo Dilshad University of Miskolc

DOI:

https://doi.org/10.14232/analecta.2025.1.71-75

Keywords:

gas hydrate, experimental system, control module

Abstract

The laboratory tests necessary for oil and gas production were carried out under realistic conditions. Due to ever deeper drilling, this can mean a pressure of up to 1000-2000 bar, and a temperature of 200-300 °C. The creation of these conditions is carried out with target machines, which are usually partially automated measuring devices. In addition to creating extreme environmental properties, other substances are often present during the measurement, such as mercury or hydrogen, justifying that the equipment can be controlled remotely with an IT system. In addition to the remote control and supervision of the measurement, the connected IT system also monitors it. The article deals with the communication solutions of the IT system of target machines used in the gas and oil industry.

Downloads

Download data is not yet available.

References

Ahad, M. A., Paiva, S., Tripathi, G., & Feroz, N. (2020). Enabling technologies and sustainable smart cities. Sustainable cities and society, 61, 102301.

Cañas, H., Mula, J., Díaz-Madroñero, M., & Campuzano-Bolarín, F. (2021). Implementing industry 4.0 principles. Computers & industrial engineering, 158, 107379.

Fachri, M. R., Sara, I. D., & Away, Y. (2015). Pemantauan parameter panel surya berbasis arduino secara real time. None, 11(4), 123-128.

Franconi, N. G., Bunger, A. P., Sejdić, E., & Mickle, M. H. (2014). Wireless communication in oil and gas wells. Energy Technology, 2(12), 996-1005.

Hamdan, H. (2018). Industri 4.0: Pengaruh revolusi industri pada kewirausahaan demi kemandirian ekonomi. Jurnal Nusantara Aplikasi Manajemen Bisnis, 3(2), 1-8.

Lv, Z., & Kumar, N. (2020). Software defined solutions for sensors in 6G/IoE. Computer Communications, 153, 42-47.

Mocanu, D. A., Bădescu, V., Bucur, C., Ștefan, I., Carcadea, E., Răboacă, M. S., & Manta, I. (2020). PLC Automation and Control Strategy in a Stirling Solar Power System. Energies, 13(8), 1917.

Ning, F., Jiang, G., Wu, X., Zhang, L., Dou, B., & Li, B. (2008, November). The Experimental System of Gas Hydrates Integrative Simulation and its control module. In TENCON 2008-2008 IEEE Region 10 Conference (pp. 1-4). IEEE.

Setiawan, A., & Ma'arif, A. (2021). Stirring system design for automatic coffee maker using OMRON PLC and PID control. International Journal of Robotics and Control Systems, 1(3), 390-401.

Yahya, S., Jadmiko, S. W., Wijayanto, K., & Tahtawi, A. R. A. (2020, April). Design and implementation of training module for control liquid level on tank using PID method based PLC. In IOP Conference Series: Materials Science and Engineering(Vol. 830, No. 3, p. 032065). IOP Publishing.

OMRON: Programming Manual for SYSMAC CP1H/CP1L CPU Unit, 2007

OMRON: Operating Manual for SYSMAC CP1H/CP1L CPU Unit, 2007